Are the inner rings of cylindrical roller bearings interchangeable?

Are the inner rings of cylindrical roller bearings interchangeable?
1. Many manufacturers of cylindrical roller bearings, such as the following, use a lot of sets to open the bearings, and the inner and outer rings of the bearings can be taken out. If they are mixed, they may not be able to find the inner and outer rings of their own bearings. I am afraid that it will affect the life of the bearing. In fact, the rings of this kind of bearings are all the same. FAG is to consider the convenience of customers so that customers can use the bearings with peace of mind. The inner and outer rings of the bearings are completely interchangeable, so please rest assured that the majority of users of cylindrical roller bearings.

2. In addition, the suffixes of cylindrical roller bearings can be interchanged. For example, whether the inner rings of NU, NJ, and bearings can be interchanged. In this case, do not replace them. The model suffix of the outer ring of the bearing shall prevail. The types of the two bearings are different so they cannot be replaced. If the inner ring of the same model is found to be mixed, it will not affect the service quality and life of the bearing after assembly.

3. The outer ring of N series cylindrical roller bearings can be removed. Some bearing manufacturers can remove the outer ring of the bearings for use, but if it is used in this way, FAG cylindrical roller bearings The bearing itself has a bearing without an outer ring, and the cost price will be much lower, so customers should not blindly remove the outer ring to use it, which will waste an outer ring and increase the cost for themselves.

HZK Bearing factory welcome your inquiry anytime.+8618864979550